The MTR 15 machine has been built to muddle through the ever growing demands in the manufacturing industry. With over 3000 units sold world wide, this machine is well accepted by the industry. |
MTR 15 |
- Compact cast-iron body guarantees the robustness of the machine.
- Hardened and ground guide bar system ensures low maintenance.
- Two slide movement.
- Ergonomics have been taken care while designing the machine.
- Quick change over time.
- PLC equipped electrical system.(Optional)
- No “ Tie-bar “ mechanism, ensuring large work area for the operator.
- Swiveling of the roll shafts to make Thru-feed rolling possible in the same machine.
- Can be customized as per needs of the user.
- Large variety of accessories are available to accommodate different jobs.
- Fixtures can be developed as per the requirement of the user.
|
| Applications |
- Metric Threads
- UN threads
- Acme threads
- Whitworth threads
- Buttress threads
- Knurling
- Serrations ( for limited module)
- Burnishing
- Special Profiles
|
Semi-Automated Special Hydraulic Fixture to hold the component with 120mm flange diameter and weighing more than 15 kg |
|
| Technical
Specifications |
| Rolling Force |
15 |
| Job Diameter (mm) |
50 |
| Maximum width of Rolls (mm) |
130 |
| Roll Diameter (mm) |
170 |
| Roll Shaft Diameter (mm) |
54 (69.85 Optional) |
| Swivel Angle (degree) |
+/-10 |
| Height from Shaft center to Job support (mm) |
84 |
| Total Power
(kw/hp) |
7 |
| Working Height (mm) |
1000 |
| Speed (rpm) |
16-26-34-42-54-84 |
| Length x Width x Height (mm) |
1000 x 850 x 1600 |
| Total Machine Weight (kg) |
2000 |
|
| * All the maximum values cannot be achieved at the same time. |
