| MTR 15 EXPO machine is built exclusively for exports and is designed and manufactured, to compete with the international market. |
|
.jpg)
MTR 15 (Expo) |
- Fabricated body with in-built power pack and coolant tank
- Hardened and ground guide bar system ensures low maintenance.
- Two slide movement.
- Ergonomics have been taken care while designing the machine.
- Quick change over time.
- PLC equipped electrical system.
- No “ Tie-bar “ mechanism, ensuring large work area for the operator.
- Swiveling of the roll shafts to make Thru-feed rolling possible in the same machine.
- Can be customized as per needs of the user.
- Large variety of accessories are available to accommodate different jobs.
- Fixtures can be developed as per the requirement of the user.
|
| Applications |
- Metric Threads
- UN threads
- Acme threads
- Whitworth threads
- Buttress threads
- Knurling
- Serrations ( for limited module)
- Burnishing
- Special Profiles
|
| Technical
Specifications |
| Rolling Force (tons |
15 |
| Job Diameter (mm) Min - Max |
3 - 50 |
| Maximum Pitch (mm) |
4 |
| Maximum width of Rolls (mm) |
130 |
| Roll Diameter (mm) Min - Max |
130 - 170 |
| Roll Shaft Diameter (mm) |
54 (69.85 Optional) |
| Swivel Angle (degree) |
+/-5 |
| Height from Shaft center to Job support (mm) |
84 |
| Total Power
(kw) |
6.18 |
| Working Height (mm) |
1100 |
| Speed (rpm) Min - Max |
16-26-34-42-54-84 |
| Length x Width x Height (mm) |
1000 x 850 x 1600 |
| Total Machine Weight (kg) |
2000 |
|
